2021 High quality Nuts And Bolts - Hexagon bolt of ordinary black steel structure, full thread – Zonolezer

Product name: Hex Bolt, Full Thread
Size: M3-100
Length: 10-5000mm or as required
Grade: 4.8/8.8/10.9/12.9
Material: Steel/35k/45/40Cr/35Crmo
Surface: Plain, Black, Zinc Plated, HDG
Standard: DIN558/DIN933/DIN961/ISO4017
Certificate: ISO 9001
Sample: Free Samples
Usage: Steel structures, multi -floor,high -rise steel structure, buildings, industrial buildings, high -way, railway, steel steam,tower,power station and other structure workshop frames

DIN 933 – 1987 Hexagon Head Screws Threaded Up To The Head – Product Grades A and B

① This standard specifies requirements for M1,6 to M52 hexagon head screws threaded up to the head, assigned to product grade A, for sizes up to M24 and lengths not exceeding 10d or 150 mm, and to product grade B for sizes greater than M24 or lengths exceeding 10 d or 150 mm.
② For thread sizes not greater than M4,also permitted without chamfered end.

Bolt (fastener)
A bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Bolts are very closely related to screws.

Bolts vs. screws
The distinction between a bolt and a screw is poorly-defined. The academic distinction, per Machinery’s Handbook, is in their intended design: bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. This definition allows ambiguity in the description of a fastener depending on the application it is actually used for, and the terms screw and bolt are widely used by different people or in different countries to apply to the same or varying fastener.

Bolts are often used to make a bolted joint. This is a combination of the nut applying an axial clamping force and also the shank of the bolt acting as a dowel, pinning the joint against sideways shear forces. For this reason, many bolts have a plain unthreaded shank (called the grip length) as this makes for a better, stronger dowel. The presence of the unthreaded shank has often been given as characteristic of bolts vs. screws, but this is incidental to its use, rather than defining.

Where a fastener forms its own thread in the component being fastened, it is called a screw. This is most obviously so when the thread is tapered (i.e. traditional wood screws), precluding the use of a nut,[2] or when a sheet metal screw or other thread-forming screw is used. A screw must always be turned to assemble the joint. Many bolts are held fixed in place during assembly, either by a tool or by a design of non-rotating bolt, such as a carriage bolt, and only the corresponding nut is turned.

Bolt heads
Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move and a tool is only needed for the nut end.

Common bolt heads include hex, slotted hex washer, and socket cap.

The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads.

Many bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque. It is sometimes assumed that screwdriver heads imply a screw and wrenches imply a bolt, although this is incorrect. Coach screws are large square-headed screws with a tapered wood screw thread, used for attaching ironwork to timber. Head designs that overlap both bolts and screws are the Allen or Torx heads; hexagonal or splined sockets. These modern designs span a large range of sizes and can carry a considerable torque. Threaded fasteners with screwdriver-style heads are often referred to as machine screws whether they are being used with a nut or not.

Bolt types
Bolt designed to allow objects to be attached to concrete. The bolt head is usually placed in concrete before it has cured or placed before the concrete is poured, leaving the threaded end exposed.
Arbor bolt – Bolt with a washer permanently attached and reversed threading. Designed for use in miter saw and other tools to auto tighten during use to prevent blade fall out.
Carriage bolt – Bolt with a smooth rounded head and a square section to prevent turning followed with a threaded section for a nut.
Elevator bolt – Bolt with a large flat head used in conveyor system setups.
Hanger bolt – Bolt that has no head, machine threaded body followed by a wood threaded screw tip. Allow nuts to be attached to what is really a screw.
Hex bolt – Bolt with a hexagonal head and threaded body. Section immediately under head may or may not be threaded.
J bolt – Bolt shaped like the letter J. Used for tie downs. Only the non curved section is threaded for a nut to be attached.
Lag bolt – Also known as lag screw. Not a true bolt. Hex bolt head with thread screw tip for use in wood.
Rock bolt – Used in tunnel construction to stabilize walls.
Sex bolt or Chicago Bolt – Bolt that has a male and female part with interior threads and bolt heads on either end. Commonly used in paper binding.
Shoulder bolt or Stripper bolt – Bolt with a broad smooth shoulder and small threaded end used to create a pivot or attachment point.
U-Bolt – Bolt shaped like the letter U where the two straight sections are threaded. A straight metal plate with two bolt holes is used with nuts to hold pipes or other round objects to the U-bolt.
Cane bolt – Also called a drop rod, a cane bolt is not a threaded fastener. It is a type of gate latch that consists of a long metal rod with a curved handle and attaches to a gate by one or more fasteners. This type of bolt was named after the shape of a cane, similar to the shape of a candy cane or walking cane.

Bolt materials
Depending on required strength and circumstances, there are several material types can be used for fasteners.

Steel fasteners (grade 2,5,8) – the level of strength
Stainless Steel fasteners (Martensitic Stainless Steel, Austenitic Stainless Steel),
Bronze and brass Fasteners – Water proof usage
Nylon fasteners – used for the light material and water proof usage.
In general, steel is the most commonly used material of all fasteners: 90% or more.

Anchors are of the following types:

(1) Payment method
We support traditional bank wire transfer, and we are also a supporter of cryptocurrencies, which can accept BTC, USDT, ETH, which can also save some bank fees for guests and protect guests’ property privacy.

(2) Packing
1. 25kg bags or 50kg bags.
2. bags with pallet.
3. 25 kg cartons or cartons with pallet.
4. Packing as customers’ request.

(3)Shipping
We cooperate with internationally renowned shipping companies, and the shipping fee depends on the delivery method you choose. International express is usually the fastest but also the most expensive way. Sea freight is the best solution for bulk shipments. The exact shipping fee can only be given to you if we know the details of the quantity, weight and method, please contact us for more information.

(4)Order Payment
Payment <=1000USD, 100% prepayment. Payment>=1000 USD, 30% T/T prepaid, balance before shipment.

(5) Minimum order quantity
The minimum order quantity for a single model of a product is generally 900kg in stock, some products may require more MOQ, the exact price can only be given to you when we know the details of the quantity, weight and method , please contact us for more information.

(6) Delivery time
Generally 5-10 days if the goods are in stock. Or 15-20 days if the goods are not in stock, it is based on the quantity.

(7) Certificates
We can provide most documents including Certificate of Analysis/Conformance; Insurance; Country of Origin and other required export documents.

(8) Service
We provide 7*27 hours of pre-sales and after-sales service, and promptly handle complex fastener procurement plans for customers.